There is no rpm indicator setting shown in my latest Apache RTR 200 4V BS6 riding modes speedometer console. Is it the case with my bike itself or else the setting is removed by the company. Because as they have given riding modes. So will they be used as rpm settings?

TVS Apache RTR 200 4V comes with three riding modes: Rain, Urban and Sport. In Rain mode, the acceleration is linear, the motor is tuned for better fuel efficiency, and ABS intrusion is moderate. In Rain mode, the ABS intrusion and the rear liftoff protection are at the highest levels to ensure better safety on low-friction surfaces. The 197.75cc single-cylinder air-cooled engine with oil cooler churns out 20.82PS at 9000rpm in Sport mode whereas power drops to 17.32PS at 7800rpm in Urban and Rain modes. Peak torque stands at 17.25Nm at 7250rpm in Sport mode and 16.51Nm at 5750rpm in Urban and Rain modes. The transmission is still the same 5-speed unit with slipper clutch as before. There’s a dedicated button on the right switchgear to change the modes on the fly. The current riding mode is also shown on the fully digital instrument cluster. Read More: - 2021 TVS Apache RTR 200 4V With Riding Modes Launched - TVS Apache RTR 200 4V: Old vs New

Appache Rtr. 180 Cc bs 6 2v lunch year

I also have the same issue